Powerstroke: 2003-2007 (6.0L)
Bilstein Rear B8 5160 Shock Absorber (25-311822) for 1999-2016 Powerstroke 6.0L / 6.4L / 6.7L / 7.3L
The Bilstein B8 5160 remote reservoir shock absorbers are specially designed for lifted trucks and SUVs, offering a direct fit installation. They feature a remote reservoir for improved cooling and wheel travel, enhancing performance over standard shocks. With a monotube design and velocity-sensitive digressive valve settings tuned for specific vehicles, they deliver consistent, fade-free performance. The shocks also include a 360-degree swivel banjo hose fitting and a sleek billet reservoir mount for a clean look. Built for durability, the B8 5160 shocks are ideal for tough off-road conditions.
Sinister Diesel STC HPOP Fitting Kit (SDHPOPFK04) for 2004-2007 Powerstroke 6.0L
The Sinister Diesel 6.0 Powerstroke STC HPOP Fitting Update Kit addresses a known issue with the “Snap-To-Connect” (STC) fitting used in 2005 and newer Powerstroke Diesel engines. The original two-piece fitting design can flex, causing seal wear, leaks, or even complete separation, leading to hard starts, no starts, or sudden engine stalls.
MBRP Tip, 6″ O.D. Angled Rolled End (T5125BLK) 5″ inlet 18″ in length, Black Coated
The 5″ Inlet (T5125BLK) is a single wall exhaust tip made of durable T304 stainless steel with a sleek black coating. Its rolled angle cut design adds a stylish touch to any vehicle. Its key features include a 5″ inlet diameter and a high-quality construction that ensures long-lasting performance.
AEM X-Series Boost Gauge 30-0306 0-35psi/2.5bar – Black Bezel and Black Faceplate
The AEM X-Series Boost Gauge 30-0306 is a high-performance, precision boost gauge that is designed to provide accurate readings of boost pressure in both PSI and bar units. Its sleek black bezel and faceplate give it a sleek and modern look, making it a great addition to any vehicle’s interior. With a wide range of 0-35psi/2.5bar, this gauge is suitable for a variety of applications, from daily drivers to high-performance race cars. Its advanced digital LED display ensures easy visibility, even in low light conditions. Overall, the AEM X-Series Boost Gauge 30-0306 is a top-of-the-line gauge that is perfect for those looking to monitor their boost pressure with precision and style.
Air Lift 25981EZ WirelessOne Tank plus EZ Mount
The Air Lift 25981EZ WirelessOne Tank plus EZ Mount is a wireless control system that includes a standard-duty compressor and allows for control of air springs through a wireless controller or smartphone. It features a EZ Mount for easy installation and has a 2-gallon auxiliary air tank to speed up air spring inflation and reduce compressor cycling. The WirelessOne Tank System upgrade kit enhances an existing WirelessOne system with a more powerful air compressor and additional air tank.
Bilstein Front B8 5100 Steering Damper (24-158930) for 1999-2009 Powerstroke 6.0L / 6.4L / 7.3L
The Bilstein B8 5100 Steering Damper is an upgraded replacement for factory steering dampers on trucks and SUVs. It reduces steering vibrations and improves steering precision, especially in older vehicles. Featuring a durable zinc coating for protection against harsh conditions, it complements other B8 5100 series products and enhances overall steering, handling, and ride comfort.
Mishimoto 6.0L Factory Fit Hot-Side Upper Boot (MMBK-F2D-03HU) fits 2003-2007 Powerstroke 6.0L
The Mishimoto 6.0L Factory Fit Hot-Side Upper Boot (MMBK-F2D-03HU) is a high-quality, direct fit replacement for the hot-side upper boot on 2003-2007 Ford Powerstroke 6.0L diesel engines. Designed and manufactured by Mishimoto, a leading aftermarket automotive company, this hot-side upper boot is engineered to provide a perfect fit and superior performance for your truck.
Mishimoto 1.1 Bar Overflow Reservoir Cap (MMRC-11-FRD) fits Ford 1999-2016
The Mishimoto 1.1 Bar Overflow Reservoir Cap (MMRC-11-FRD) is designed for 1999-2016 Ford Powerstroke engines. It helps maintain proper cooling system pressure under demanding conditions. This cap replaces Ford 9C3Z-8101-B and Motorcraft RS-527. It installs easily and is built for consistent performance.
BD Diesel EXHAUST MANIFOLD – PASSENGER SIDE (1041486) for 2003-2007 Powerstroke 6.0L
The BD Diesel Exhaust Manifold – Passenger Side (1041486) is a durable, high-performance replacement for 2003–2007 Ford Powerstroke 6.0L engines. Made from high-silicon ductile iron, it resists cracking and heat damage better than stock manifolds. Designed for a direct OEM fit, it improves exhaust flow and engine efficiency, making it a reliable upgrade for both stock and modified engines.
BD Diesel Cool Down Timer Kit v2.0 (1081160) for 1994-2005 Cummins 5.9L, 1994-2018 Powerstroke 7.3L/6.0L/6.4L/6.7L w/o Push button start & 2001-2014 Duramax 6.6L
Turbochargers run at high temperatures and need to cool down properly to prevent damage. The Cool Down Timer (CDT) keeps the engine idling after shutdown to maintain oil flow to the turbocharger, preventing overheating and coking of the bearings. This helps avoid premature wear and ensures proper lubrication. The CDT can be set for up to 5 minutes of idle time or can shut down based on exhaust temperature using a K-Type EGT probe.
MBRP Tip, 4″ O.D. Angled Rolled End 3.5″ inlet (T5112) 10″ length, T304
The 3.5″ Inlet Exhaust Tip (T5112) is a high-quality aftermarket accessory for vehicles. Made from T304 stainless steel, it features a rolled angle cut design and a single wall construction. This exhaust tip not only enhances the appearance of your vehicle, but also improves exhaust flow and adds a deep, aggressive sound. Its durable material ensures long-lasting performance and resistance to corrosion. Upgrade your vehicle’s exhaust system with this sleek and functional exhaust tip.
MBRP Tip, 4″ O.D. Angled Rolled End (T5155) 3″ inlet, 10″ length, T304
The 3″ Inlet Exhaust Tip (T5155) is a high-quality, durable exhaust tip made from T304 stainless steel. Its single wall design and rolled angle cut give it a sleek and stylish look. This exhaust tip is easy to install and is compatible with a variety of vehicles. Its key features include its corrosion-resistant material, precise fit, and enhanced exhaust sound. With its unique design and top-notch construction, this exhaust tip is a must-have for any car enthusiast looking to upgrade their vehicle’s appearance and performance.
Air Lift 74000 WirelessAir
The Air Lift 74000 WirelessAir is a wireless control system that includes a heavy-duty compressor. It can be controlled with a wireless controller or a smartphone using a free app and has three user-defined presets. The EZ Mount feature allows for easy installation, and an upgrade kit is available with a 444c air compressor and 2-gallon auxiliary air tank for faster inflation and less compressor cycling.
MBRP 5″Turbo-Back Exhaust Single Side Exit, Race Profile, Armor Lite (S62240PLM) for 2003-2007 Powerstroke 6.0L
The 5″ Turbo-Back Exhaust (S62240PLM) is a high-performance exhaust system for you diesel truck. It features a single side exit and a race profile, making it perfect for track use. The Armor Lite construction ensures durability and longevity, while the 5″ diameter allows for maximum exhaust flow. This exhaust system is a must-have for any serious racer looking to improve their vehicle’s performance.
Sinister Diesel Coolant Filtration System (SDCOOLFIL60W) for 2003-2007 Powerstroke 6.0L
Contaminants like casting sand, metal shavings, rust, and mineral deposits in the coolant of a 6.0L Powerstroke engine can reduce cooling efficiency and cause damage over time. A filter block kit is available to help remove these impurities. It mounts easily without drilling and includes all necessary fittings. The filter is replaceable, with recommended changes at 500 miles, then at 3,000 miles twice, and annually after that.
MBRP 4″ Turbo-Back Exhaust Single Side Exit, Race Profile (S6206P) for 2003-2007 Powerstroke 6.0L EC / CC
The 4″ Turbo-Back Exhaust (S6206P) is a high-performance exhaust system designed for race cars. It features a single side exit and a race profile, making it perfect for track use. Its key features include a 4″ diameter for maximum airflow, a turbo-back design for improved horsepower and torque, and a single side exit for a more aggressive look. The benefits of this exhaust include increased engine performance, improved exhaust flow, and a deep, powerful sound. Its unique selling points are its race-specific design and high-quality construction, making it a must-have for any serious racer.
Fleece Tall Stack Cover – 8″ Diameter – Miter Cut (FPE-STK-CVR-8-45) fits 8″ stack
The Fleece Tall Stack Cover – 8″ Diameter – Miter Cut (FPE-STK-CVR-8-45) is a high-quality fleece cover designed for 8-inch vertical exhaust stacks. Its miter cut ensures a snug fit on angled stacks, protecting against dirt, moisture, and debris. Ideal for trucks and tractors, it helps prevent corrosion, prolonging the stack’s lifespan. Durable and easy to install, it offers both protection and improved appearance.
Mishimoto Liquid Chill® ( MMRA-LC-5050F) Synthetic Engine Coolant, Premixed 1 Gallon
Liquid Chill Synthetic Engine Coolant (MMRA-LC-5050F) is a premixed solution designed for both diesel and gasoline engines. It uses a nontoxic propylene glycol base with POAT additives for extended service life. This coolant meets ASTM D6210 and ASTM D3306 standards while exceeding stock specifications. It provides protection against extreme temperatures and is safe for all water-cooled engines.
FASS Fuel Sump Kit With Bulk Head Fitting STK5500
The FASS Fuel Sump Kit with Bulk Head Fitting STK5500 is a must-have for any diesel truck owner. This kit provides a reliable way to ensure that your engine is receiving clean, air-free fuel. The bulk head fitting allows for a secure and leak-free installation, giving you peace of mind while on the road. The sump kit also includes a fuel return port, making it compatible with aftermarket fuel systems. With its durable construction and easy installation process, the FASS Fuel Sump Kit is a valuable addition to your truck’s fuel system. Say goodbye to fuel system issues and hello to improved performance with the FASS Fuel Sump Kit with Bulk Head Fitting STK5500.
Mishimoto Replacement Oil Cooler (MMOC-F2D-03) fits 2003-2007 Powerstroke 6.0L
The Mishimoto Replacement Oil Cooler (MMOC-F2D-03) is a high-quality, durable upgrade for the 2003-2007 Powerstroke 6.0L engine. Designed to improve the overall performance and longevity of your engine, this oil cooler is a must-have for any serious truck enthusiast.
MBRP 5″ Inlet Exhaust Tip (T5075), Single Wall, Rolled Angle Cut, T304 Stainless Steel
The 5″ Inlet Exhaust Tip (T5075) is a high-quality, durable product made from T304 stainless steel. Its single wall design and rolled angle cut give it a sleek and stylish appearance. This exhaust tip is easy to install and is compatible with a variety of vehicles. Its key features include a 5″ inlet size and a corrosion-resistant finish. It not only enhances the look of your vehicle but also improves its performance by increasing exhaust flow. Its unique selling points are its high-quality material and eye-catching design, making it a must-have for any car enthusiast.
MBRP 4″ ID. to 5″ ID. Adapter AL (UA2004) Universal Fit
The 4″ Inlet Adapter (UA2004) with a 5″ outlet is a versatile and universal fit product that offers convenience and functionality. Its key features include a 4″ inlet and 5″ outlet, making it compatible with a wide range of equipment. The adapter is also easy to install and provides a secure connection for efficient operation. Its unique selling points include its durability and compatibility, making it a reliable choice for various applications. With this adapter, users can easily connect different equipment and enjoy seamless performance.
MBRP Exhaust Tip 2.5″ Inlet (T5113), Rolled Angle Cut, Single Wall, T304 Stainless Steel
The T5113 Exhaust Tip is a high-quality product made from T304 stainless steel. It features a 2.5″ inlet and a rolled angle cut design, giving it a sleek and stylish look. The single wall construction adds durability and the stainless steel material ensures long-lasting performance. This exhaust tip is a great addition to any vehicle, providing improved exhaust flow and a more aggressive sound. Its key features include a universal fit and easy installation, making it a versatile and convenient choice for car enthusiasts. With its high-quality construction and eye-catching design, the T5113 Exhaust Tip is a must-have for those looking to upgrade their vehicle’s exhaust system.
FASS Fuel Systems WH-1006 Wire Harness 14 Gauge Universal
The FASS Fuel Systems WH-1006 Wire Harness is a versatile and reliable solution for all your wiring needs. Made from high-quality 14 gauge wire, this universal harness is designed to work with a wide range of FASS fuel systems. Its durable construction ensures long-lasting performance, making it a great investment for any vehicle owner. The plug-and-play design makes installation quick and easy, saving you time and hassle. With this wire harness, you can be confident that your fuel system will have a secure and efficient electrical connection. Whether you’re upgrading your existing FASS system or building a new one, the WH-1006 Wire Harness is an essential component that will help keep your vehicle running smoothly.
