Intake System
S&B Cold Air Intake Cotton Cleanable (75-5070) for 2003-2007 Powerstroke 6.0L
The S&B Cold Air Intake Cotton Cleanable (75-5070) for 2003-2007 Powerstroke 6.0L is a high-quality and durable aftermarket air intake system designed to improve the performance and efficiency of your Ford Powerstroke truck. This cold air intake is specifically designed for the 6.0L Powerstroke engine and is engineered to provide increased horsepower and torque, as well as improved fuel economy.
S&B Intake Replacement Filter Cotton Cleanable (KF-1039) for 2003-2007 Powerstroke 6.0L
The S&B Intake Replacement Filter Cotton Cleanable (KF-1039) is a high-quality replacement filter designed specifically for 2003-2007 Powerstroke 6.0L engines. This cleanable filter is made with durable cotton material that is washable and reusable, making it a cost-effective and environmentally friendly option.
Sinister Diesel SD-CAI-FILTER Universal Replacement Reusable Air Filter (4″ Inner Diameter) for 1994-2024 Powerstroke / Cummins / Duramax
Sinister Diesel SD-CAI-FILTER air filter with 4 inch ID, reusable 8-layer cotton media, and high airflow design.
ODAWGS S2R 6.0 Ported Intake Manifold (300299) for 2003-2007 Powerstroke 6.0L
The 6.0L Power Stroke engine has restrictive airflow, limiting its power potential. ODAWGS DIESEL addresses this by offering fully ported intake manifolds that improve airflow, boost power, and enhance fuel economy. Unlike welded alternatives, their cast design ensures consistent quality, better performance, and affordability.
No Limit Fabrication Pre-Filter 4″ & 4.5″ Inlet (PFB) for 2003-2019 Powerstroke 6.0L / 6.4L / 6.7L
The No Limit Fabrication Pre Filter is designed to extend the life of your cold air intake filter by adding an extra layer of protection. Ideal for harsh conditions, it helps block dirt and moisture while maintaining airflow. Compatible with 6.0, 6.4, and 6.7 Powerstroke intake systems.
No Limit Fabrication Pre-Filter 5″ Inlet (PFB) for 2003-2019 Powerstroke 6.0L / 6.4L / 6.7L
The No Limit Fabrication Pre Filter is designed to extend the life of your cold air intake filter by adding an extra layer of protection. Ideal for harsh conditions, it helps block dirt and moisture while maintaining airflow. Compatible with 6.0, 6.4, and 6.7 Powerstroke intake systems.
Mishimoto Silicone Coolant Hose Kit (MMHOSE-F2D-05M) fits 2005-2007 Powerstroke 6.0L Mono Beam Chassis
Mishimoto coolant hose kit MMHOSE-F2D-05M Direct-fit silicone for 2005–2007 6.0L Powerstroke mono beam chassis.
ODAWGS Intake Manifold Gaskets (301008) for 2003-2007 Powerstroke 6.0L
The Ford Intake Manifold Gasket is a genuine replacement for reinstalling the intake manifold in 2003-2007 Ford 6.0L Powerstroke engines. It ensures a proper fit and meets or exceeds the original gasket’s specifications.
Mishimoto Cast End Tank Replacement Intercooler Black (MMINT-F2D-03TBK) Fits 2003-2007 Powerstroke 6.0L
Mishimoto intercooler MMINT-F2D-03TBK Bolt-on intercooler for 2003–2007 6.0L Powerstroke with thicker core and cast end tanks.
Mishimoto Intercooler Kit Silver (MMINT-F2D-03KSL) fits 2003-2007 Powerstroke 6.0L
The Mishimoto Intercooler Kit Silver (MMINT-F2D-03KSL) is a top-of-the-line aftermarket upgrade for 2003-2007 Ford Powerstroke 6.0L diesel engines. Designed for optimal performance and durability, this intercooler kit is the perfect addition to any modified or stock 6.0L Powerstroke.
Mishimoto Intercooler Kit Black (MMINT-F2D-03KBK) fits 2003-2007 Powerstroke 6.0L
Mishimoto intercooler MMINT0F2D-03K Direct-fit intercooler kit for 2003–2007 6.0L Powerstroke with thicker core and increased airflow.
Mishimoto 6.0L Hot-Side Intercooler Lower Boot (MMBK-F2D-03HL) fits 2003-2007 Powerstroke 6.0L
The Mishimoto 6.0L Hot-Side Intercooler Lower Boot (MMBK-F2D-03HL) is a high-quality aftermarket upgrade designed to improve the performance and reliability of your 2003-2007 Powerstroke 6.0L engine. This hot-side intercooler lower boot is specifically engineered to replace the factory boot, which is known to fail under high boost and increased temperatures.
Mishiimmoto 6.0L Cold-Side Intercooler Upper Boot (MMBK-F2D-03CU) fits 2003-2004 Powerstroke 6.0L
The Mishiimmoto 6.0L Cold-Side Intercooler Upper Boot (MMBK-F2D-03CU) is a high-quality aftermarket component designed to improve the performance and reliability of your 2003-2004 Powerstroke 6.0L engine. This intercooler upper boot is specifically designed to replace the factory component that is prone to failure and can cause issues such as boost leaks and loss of engine power.
Mishimoto 6.0L Cold-Side Intercooler Lower Boot (MMBK-F2D-03CL) fits 2003-2004 Powerstroke 6.0L
The Mishimoto 6.0L Cold-Side Intercooler Lower Boot (MMBK-F2D-03CL) is the perfect upgrade for your 2003-2004 Powerstroke 6.0L. This high-quality boot is designed to improve the performance and reliability of your intercooler system, making it a must-have for any diesel enthusiast.
Mishimoto 6.0L Cold-Side Intercooler Boots (MMBK-F2D-03CBK) fits 2003-2004 Powerstroke 6.0L
The Mishimoto MMBK-F2D-03CBK 6.0L Cold-Side Intercooler Boots are a high-quality upgrade for your 2003-2004 Powerstroke 6.0L diesel engine. These boots are designed to replace the stock rubber boots on the cold side of your intercooler, providing improved durability and reliability.
S&B Hot Side / Turbo Side Only Boot Kit (83-2008) for 2003-2007 F250/F350 Powerstroke 6.0L
S&B 83-2008 boot kit for 2003–2007 6.0L Powerstroke replacing hot side & turbo boots.
S&B Cold Side Boot Kit (83-2002) for 2003-2004 Powerstroke 6.0L
The S&B Cold Side Boot Kit (83-2002) is a high-quality upgrade for 2003-2004 Powerstroke 6.0L engines. It is specifically designed to replace the factory cold side boot and provide improved performance and durability.
S&B Hot Side Boot Kit (83-2001) for 2003-2007 Powerstroke 6.0L
The S&B Hot Side Boot Kit (83-2001) is a must-have upgrade for 2003-2007 Powerstroke 6.0L owners looking to improve the performance and reliability of their vehicle. This comprehensive kit includes everything you need to replace the hot side boots on your Powerstroke, ensuring a tight and secure seal for maximum power and efficiency.
Sinister Diesel Pre-Filter Sock for Cold Air Intake (SDUPFS0120)
The Sinister Diesel Pre-Filter Sock for Cold Air Intake SDUPFS0120 helps protect your air filter from dirt and debris buildup. It filters contaminants down to 5 microns while maintaining consistent airflow performance. The pre-filter helps extend air filter service life and supports reliable intake airflow. Testing shows no significant airflow restriction during operation. The SDUPFS0120 includes a 2-year warranty.
Sinister Diesel UNDELETE KIT (SDUD60SCKIT) for 2004.5-2007 Powerstroke 6.0L
The Sinister Diesel UNDELETE KIT SDUD60SCKIT fits 2004.5-2007 6.0L Powerstroke engines. It includes a square-style EGR cooler, Ford EGR valve, and installation components. The upgraded EGR cooler uses high-flow stainless steel tubing with TIG welded construction. This kit restores California and Federal emissions compliance. The SDUD60SCKIT provides a complete direct-fit undelete solution.
Sinister Diesel Intercooler Charge Pipe Kit (SDINTRPIPE60KIT) for 2005-2007 Powerstroke 6.0L
The Sinister Diesel 6.0 Charge Pipe Kit is a performance upgrade for 2003-2007 Ford F250 and F350 trucks with the 6.0L Powerstroke engine. It replaces restrictive factory intercooler piping with 6061 aluminum alloy, CNC mandrel-bent tubing for improved airflow, reducing turbo lag and enhancing throttle response. The kit includes 5-ply silicone boots rated to 400psi and stainless steel clamps for a secure fit.
Sinister Diesel Intercooler Charge Pipes w/Intake Elbow (SDINTRPIPE60IEKIT) for 2003-2007 Powerstroke 6.0L
The Sinister Diesel 6.0 Charge Pipe Kit with Intake Elbow is a performance upgrade for 2003-2007 Ford F250 and F350 trucks with the 6.0L Powerstroke engine. It improves airflow, reduces turbo lag, and enhances throttle response for increased horsepower. Made from 6061 aluminum alloy with CNC mandrel-bent tubing, it features a high-gloss Sinister Blue powder coat for durability.
Sinister Diesel Hot Side Charge Pipe (SDINTRPIPE60HOT) for 2003-2007 Powerstroke 6.0L
The Sinister Diesel Hot Side Intercooler Charge Pipe for the 6.0L Powerstroke is a high-performance upgrade that improves airflow by replacing the restrictive factory piping. Made from durable 6061 aluminum alloy with CNC mandrel bends, it enhances engine power and lowers EGTs. It includes 5-ply silicone boots rated to 400psi for reliability and is TIG welded for precision.
Sinister Diesel Cold Side Charge Pipe (SDINTRPIPE60COLD) for 2003-2007 Powerstroke 6.0L
The Sinister Diesel Cold Side Charge Pipe Kit for the 6.0L Powerstroke improves airflow by replacing the restrictive factory pipe. Made from 6061 aluminum with smooth CNC mandrel bends, it enhances power and lowers EGTs. The kit includes durable 5-ply silicone boots rated to 400psi for reliable performance.
