Engine Upgrades
BD Diesel SCREAMER TURBOCHARGERS (1045850) for 2020-2022 POWERSTROKE F-250/F-350 6.7L
A drop-in, stock appearing turbocharger built from New Genuine Ford Turbochargers. The Rotating assembly has been upgraded to a larger compressor wheel and high flow turbine wheel to allow for increased mass airflow, maximum boost, horsepower and torque. All of this performance was gained while also lowering EGT’s and decreasing drive pressures.
https://reviewdiesel.com/wp-content/uploads/I-00545-20-Ford-Superduty-Screamer-Installation.pdf
S&B MAP Sensor Spacer Kit (82-1006) for 2020-2024 Powerstroke 6.7L
The S&B MAP Sensor Spacer Kit (82-1006) is a must-have upgrade for any 2020-2024 Powerstroke 6.7L truck owner. This easy-to-install kit is designed to improve performance and efficiency by increasing the accuracy of the Manifold Absolute Pressure (MAP) sensor readings.
Sinister Diesel Battery Hold Down (SDG67PBHD110120) for 2011-2022 Powerstroke 6.7L
These CNC-milled billet aluminum battery hold-downs from Sinister Diesel keep your battery secure while adding style. They are powder-coated in Sinister Blue for durability in harsh engine bay conditions. Sold as a set of two for both batteries.
Sinister Diesel High Amp (400A) Wiring Upgrade Kit (SDALTWIRE)
This kit includes all necessary cables to upgrade the alternator charge, alternator ground, and chassis ground. It enhances performance for both stock and high-output alternators up to 400 amps. The cables feature 5285-strand pure copper construction with a 17.2mm diameter and a hyperflex frosted jacket.
Sinister Diesel 320 Amp OEM High Output Alternator (SDALT67P320) for 2011-2016 Powerstroke 6.7L
Sinister Diesel’s 320 Amp OEM alternators are a trusted solution for Ford Powerstroke 6.7L alternator failures, which can cause electronics issues due to low voltage. They use brand-new OEM components for reliability and require no modifications for installation. The alternators come with a 1-year warranty.
Sinister Diesel Battery Hold Down (SD67PBHD110120) for 2011 Powerstroke 6.7L
These Sinister Diesel battery hold-downs secure your battery while adding style. CNC-milled from billet aluminum and powder-coated in Sinister Blue for durability, they come in a set of two for both batteries.
BD Diesel High Idle Switch (1036610) for 2005-2024 Powerstroke 6.0L / 6.4L / 6.7L / 6.8L / 7.3L
For when days are short and the nights are cold, you want your engine to heat up quicker. When you are using a PTO, or constantly idling , these are the times, when you need an elevated idle. BD’s High Idle kits are easy to install and in most cases adjustable.
Fleece Turbo Compressor Discharge Adapter Kit for S400 Turbos (FPE-S4TCDA-KIT) Universal
The Fleece Turbo Compressor Discharge Adapter Kit (FPE-S4TCDA-KIT) is a durable, high-quality solution for connecting S400 turbochargers to custom intercooler piping. Made from robust, machined aluminum, it ensures optimal airflow and reliable performance under high boost. Its universal design fits a wide range of applications, making it ideal for diesel upgrades and high-performance builds.
AEM 100 PSIg Brass Sensor Kit 1/8 in. NPT Male Thread (30-2131-100)
The AEM 100 PSIg Brass Sensor Kit is a reliable and high-quality product designed for precise pressure readings. The sensor body is made of durable brass material, ensuring long-lasting use and accuracy. The 1/8 inch NPT male thread makes it easy to install in a variety of applications. This kit also includes a 100 PSIg brass sensor connector and pins, providing all the necessary components for a complete and efficient sensor setup. Whether for automotive, industrial, or other uses, this brass sensor kit is a versatile and essential tool for any pressure measurement needs.
BD Diesel Turbo Blanket – T3 S300 Wastegated (1453521) fits T3 S300 Wastegated Turbochargers
The BD Diesel Turbo Blanket – T3 S300 Wastegated (1453521) is designed for T3 S300 Wastegated Turbochargers to improve performance and thermal protection. It reduces turbo lag and under-hood temperatures by retaining heat within the turbo housing, enhancing exhaust gas velocity and efficiency. Made from durable, heat-resistant materials, it safeguards nearby components from heat damage. Ideal for performance enthusiasts, it’s a valuable upgrade for better turbo performance and engine bay safety.
BD Diesel Constant Tension Hose Clamp 2.75in High Torque (1405209) Universal
The BD Diesel Constant Tension Hose Clamp (2.75in High Torque, 1405209) is a durable, high-performance clamp designed for secure sealing in high-pressure automotive applications. It maintains consistent tension to adapt to temperature changes and hose movement, ensuring leak-free performance. Ideal for turbo systems and coolant lines, it offers strong clamping force and long-lasting reliability, making it a top choice for automotive enthusiasts and professionals.
Fleece Turbo Drain Tube Kit for S300/S400 (FPE-CTDT-KIT) Universal
The Fleece Turbo Drain Tube Kit (FPE-CTDT-KIT) is a durable, universal oil drain solution for S300 and S400 turbochargers. It features a flexible stainless steel braided hose and precision-machined fittings for a secure, leak-free connection. Designed for compatibility with various engine setups, it’s ideal for custom or performance applications, offering reliable performance and easy installation for turbo upgrades or replacements.
AEM 150 PSIg Brass Sensor Kit (30-2131-150) 1/8 in. NPT Male Thread
The AEM 150 PSIg Brass Sensor Kit (30-2131-150) is a reliable and versatile pressure sensor kit that is designed to accurately measure up to 150 pounds per square inch gauge (PSIg) of pressure. The sensor body is made of durable brass material, ensuring its longevity and resistance to corrosion. With a 1/8 inch NPT male thread, this sensor can easily be installed in a variety of applications. The kit includes a 150 PSIg brass sensor connector and pins, making it a complete package for immediate use. Whether you need to monitor the pressure in your car’s engine or in an industrial setting, this sensor kit is a great choice for its accuracy and durability.
Mishimoto 6.7L Baffled Oil Catch Can Kit (MMBCC-F2D-17BE) fits 2017-2021 Powerstroke 6.7L
The Mishimoto 6.7L Baffled Oil Catch Can Kit (MMBCC-F2D-17BE) is the ultimate solution for keeping your 2017-2021 Powerstroke 6.7L engine running at its best. Designed with performance in mind, this catch can kit is a must-have for any diesel truck enthusiast looking to improve their engine’s longevity and power.
BD Diesel Turbo Mounting Kit (1048010) for T6 Turbo
The BD Diesel Turbo Mounting Kit (part #1048010) is designed for installing a T6 turbocharger in high-performance diesel applications. It includes all necessary hardware for a secure, efficient installation, reducing setup time and improving turbo performance. Built for durability under high temperatures and pressure, it’s ideal for enthusiasts and professionals upgrading to a T6 turbo, offering reliable and compatible construction for enhanced system reliability and performance.
BD Diesel Turbo Adapter Manifold Flange (1044106) for T4-T3 Adapter Flange – All Diesel Truck Apps
The BD Diesel Turbo Adapter Manifold Flange (1044106) is a durable, high-performance adapter that enables the installation of a T4 turbocharger onto a T3 exhaust manifold. Designed for reliability and minimal exhaust leakage, it allows for turbo upgrades without replacing the entire manifold, making it ideal for diesel performance enthusiasts and custom setups.
BD Diesel Constant Tension Hose Clamp 3.5in High Torque (1405212) Universal
The BD Diesel Constant Tension Hose Clamp 3.5in High Torque (1405212) is a durable, spring-loaded clamp designed for high-boost, high-temperature applications. It automatically adjusts to hose expansion and contraction, ensuring a consistent seal. Ideal for turbocharger systems and intercooler piping, its high-torque design prevents leaks and hose blow-offs, making it a reliable choice for performance-focused diesel engines.
BD Diesel Constant Tension Hose Clamp 2.59in-2.94in High Torque (1405208) Universal
The BD Diesel Constant Tension Hose Clamp (1405208) is a durable, high-torque clamp designed for secure hose connections in high-performance diesel and heavy-duty automotive systems. With an adjustable diameter of 2.59 to 2.94 inches, it maintains consistent pressure despite temperature changes, reducing leaks and enhancing performance.
BD Diesel Turbo Blanket (1453523) for T6 S400 / S500 Turbos
The BD Diesel Turbo Blanket (1453523) is a high-performance thermal insulation product designed for T6 S400 and S500 turbochargers. It retains heat within the turbo to improve efficiency and spool-up times while reducing under-hood temperatures. Made from heat-resistant materials, it protects surrounding engine components and enhances reliability, making it ideal for high-performance and heavy-duty diesel applications.
Fleece T4 Pedestal Spacer – 1.5″ Thick (FPE-T4PED-SPACER1.5) for T4 Turbos
The Fleece T4 Pedestal Spacer – 1.5″ Thick (FPE-T4PED-SPACER1.5) is a durable, precision-made spacer that raises T4 turbochargers 1.5 inches to provide extra clearance for custom piping, better airflow, and component clearance. Designed for high-performance diesel and racing applications, it ensures a secure, leak-free fit and is compatible with various T4 turbo setups, offering enhanced installation flexibility.
BD Diesel Constant Tension Hose Clamp 4in High Torque (1405213) Universal
The BD Diesel Constant Tension Hose Clamp 4in High Torque (1405213) is a durable, stainless steel clamp designed for heavy-duty diesel applications. It maintains a secure, leak-free seal under extreme temperatures and pressure by automatically adjusting to hose compression. Ideal for turbochargers and intercoolers, it offers high-torque performance and corrosion resistance, making it suitable for both upgrades and maintenance.
BD Diesel E-PAS Emergency Engine Shutdown (1036757) for 2020-2022 Powerstroke 6.7L
The BD Diesel E-PAS Emergency Engine Shutdown (1036757) is a safety device for 2020–2022 Ford Powerstroke 6.7L diesel engines that automatically shuts down the engine during a diesel runaway caused by flammable or oil vapor ingestion. It cuts off the air supply to stop combustion, using electronic activation for quick, hands-free response. Easy to install, it enhances safety and reliability for these trucks.
AEM X-Series Fluid Pressure Gauge (30-0301) For Universal Application
The AEM 30-0301 X-Series Pressure Gauge provides accurate fluid pressure readings. It features a digital display with LED indicators and PSI/BAR options. The 52mm design fits standard pods and installs easily. Includes CANbus and analog output for data logging.
