BD Diesel TorqueMaster 68RFE Transmission & Converter Package (1064294BM) for 2019-2024 Cummins 6.7L
$8,671.95
The BD Diesel 1064294BM TorqueMaster 68RFE package fits 2019-2024 Cummins 6.7L trucks. It includes a built transmission with billet input shaft and triple disc converter. Designed for towing, street, and performance use. Improves durability, shifting, and power handling.
BD Diesel TorqueMaster 68RFE Transmission & Converter Package 1064294BM for 2019-2024 Cummins 6.7L
BD Diesel 1064294BM 68RFE Transmission Package for Cummins Performance
The BD Diesel TorqueMaster 68RFE Transmission & Converter Package 1064294BM upgrades your 2019-2024 Cummins 6.7L. It delivers a complete matched transmission and torque converter system. As a result, your truck handles power and torque more effectively.
When you choose the 1064294BM, you get a system that has been dyno tested together. Therefore, both components work seamlessly under load. Because of this, performance and reliability improve for towing, street, and track use.
Built 68RFE Transmission with Billet Input Shaft Strength
The BD Diesel 1064294BM transmission includes a billet input shaft for added strength. This upgrade helps handle rapid throttle input and high horsepower. As a result, your transmission resists failure under heavy load.
In addition, the transmission features a hard anodized valve body with a new solenoid pack. It also includes a custom bonded separator plate to increase line pressure. Because of this, internal leaks are reduced and shifting performance improves.
The system also includes upgraded clutch capacity with a 33 percent increase in overdrive and 2C clutches. Therefore, the transmission can hold more power without slipping.
Heavy Duty Internal Components for Long-Term Durability
The 1064294BM includes a reinforced low reverse one-way clutch with cam and roller design. It also features a 4C billet spring retainer and steel girdle for the 2C piston. As a result, the transmission gains improved strength and clutch apply area.
In addition, BD QT100 pressure plates reduce deflection and distortion. Because of this, clutch performance stays consistent over time. The custom big stack overdrive shaft and reinforced accumulator plate further improve durability.
Deep Sump Pan and Cooling Capacity Improvements
The BD Diesel 1064294BM includes a heavy-duty deep sump oil pan. This pan increases fluid capacity and improves cooling performance. Therefore, your transmission runs cooler under load.
In addition, increased fluid volume helps reduce case flex. Because of this, the transmission maintains stability during heavy use.
Triple Disc Torque Converter for Towing and Street Performance
This package includes a triple disc torque converter designed for street and towing applications. It features enhanced stall characteristics for improved drivability. As a result, your truck delivers smoother engagement and better power transfer.
In addition, the converter includes heavy-duty springs to absorb shock. The stamp forged one-piece cover prevents warping from heat. Because of this, long-term durability improves significantly.
The converter also uses trapezoid tooth design for better contact and reduced wear. Therefore, it operates more efficiently with less chatter.
Advanced Converter Design for Efficiency and Strength
The 1064294BM converter includes thrust bearings instead of plastic washers. It also features a riveted piston to ensure alignment and reduce vibration. As a result, the system maintains consistent performance under load.
In addition, furnace brazed turbine fins improve fluid coupling efficiency. Because of this, power transfer becomes more efficient. The reduced weight design also improves overall performance.
Complete Transmission Upgrade for Cummins Reliability
The BD Diesel 1064294BM provides a complete transmission solution built for power and durability. It supports high-performance applications while maintaining drivability. Therefore, your truck performs reliably in demanding conditions.
Installation time is approximately 9 hours. Special tuning is required for 2019-up applications to increase line pressure.
Warranty includes 36 months or 150,000 miles for parts and 12 months or 24,000 miles for labor.
If you want a transmission package that delivers strength, reliability, and performance, this is a proven solution.
Explore more upgrades for your truck here: 2019-2024 Cummins 6.7L
| Weight | 329 lbs |
|---|---|
| Dimensions | 44.5 × 27.3 × 23.5 in |
Fitment
2019-2024 Cummins 6.7L
Features
TRANSMISSION
- Hard anodized valve body and new solenoid pack installed in every unit
- Custom bonded gasket valve body separator plate increases line pressure while stopping internal cross leaks
- Heavy duty cam & roller design low reverse one way clutch
- New 4C billet spring retainer
- Steel girdle added to 2C piston to allow for more clutches and broader apply area
- BD durable QT100 pressure plates allow for increased clutch counts and reduce deflection and distortion within the clutch drum
- Over Drive clutches 33% increase & 2C clutches 33% increase
- Custom Big Stack overdrive shaft
- BD reinforced accumulator plate
- BD Deep sump oil pan adds extra fluid and cooling capacity while reducing case flex
- Performance Transmission but with the added touch of a Billet Input Shaft to take the “snap” from rapid throttle and high horsepower
- Special tuning required for 2019-up applications for increased line pressure. Line pressure controller not included.
TORQUE CONVERTER
- Triple Disc
- Enhanced Stall – Street/Towing applications
- HD springs absorb shock of engagement
- Stamp forged 1-piece cover
- Eliminates warpage from clutch heat
- Taller cover can be rebuilt more often
- Trapezoid teeth design
- Engineered tighter tolerances
- Self-centering trapezoid teeth design increases contact decreases wear and chatter
- Thrust bearings – not plastic thrust washers
- Riveted piston ensures alignment & eliminates vibration or embrittlement from welding
- Cast stator designs maximizes torque
- New sprag components ensure long term durability
- Furnaced brazed turbine fins for improved fluid coupling efficiency
- Reduced overall weight by 12lbs compared to competitors
Installation
INSTALL TIME
Warning
Related products
FASS Drop-In Series Electric Heater Probe Kit (DIFSHK1001) for Drop-In Series FASS Fuel System.
