Duramax: 2007.5-2010 (LMM)
Garrett Vane Position Sensor (763527-0712) for 2006-2016 Duramax LBZ / LMM / LML
Description:
Replace the worn out or faulty vane position sensor with this Genuine Garrett Factory Replacement. If you are getting the common turbo vane sensor code, this should take care of the problem. More serious issues may exist, but an updated sensor may be all that is needed if the turbo is in good condition.
Fits: 2006 thru 2016 Chevy Silverado/GMC Sierra 2500HD/3500HD LBZ/LMM/LML Duramax Diesel
KC Turbo Turbo Installation Kit (302625) for 2001-2010 Duramax 6.6L LB7 / LLY / LBZ / LMM
This Turbocharger Installation Kit includes all the necessary gaskets and components you need when upgrading or replacing the turbo in your 2001-2010 GM 6.6L Duramax. This installation kit includes high-quality components for a easy installation.
KC Turbo Vortex Stage 1 Turbo 63.5/64 (302149-LMM) for 2004.5-2010 LLY
This direct bolt on turbocharger has been designed from the ground up, taking all that KC Turbos R&D over the last decade and implementing that technology and reliability in the KC Vortex Turbo series. That’s right the market has been begging for years for us to make and bring you the KC Turbos quality and performance to an upgraded drop in replacement, and we have worked tirelessly to do that. The KC Vortex Stage 1 Turbo was designed as a drop in replacement for the 2004.5-2016 (LLY-LBZ-LMM-LML) Duramax Diesel Engines.
FASS No-Drop Series 100GPH Fuel System Stock-600HP (NDTSC10100G) For 2001–2010 Duramax 6.6L
EAS Replacement EGT 15 Lead Probe (98920) for Edge CS2/CTS2 and EAS EGT Kit
The Edge EAS Replacement 15 Inch EGT Lead restores proper operation for EGT monitoring systems using part number 98620. This plug-and-play replacement connects the EGT probe to the Edge Accessory System. Once installed, the sensor sends exhaust gas temperature data directly to the compatible Edge monitor. Accurate EGT monitoring helps protect diesel engines during towing or performance use. Installation requires a properly drilled and tapped exhaust manifold for the EGT probe.
Edge EAS Street Diesel Kit (98623) for Edge CTS3 and CS2/CTS2
The Edge EAS Street Diesel Kit expands the monitoring capability of CTS3 displays. It includes an EGT probe and two 0–100 psi pressure sensors for monitoring exhaust gas temperature, boost pressure, and fuel pressure. The EAS system connects directly to the CTS3 monitor and installs quickly with plug-and-play wiring. Once installed, drivers can view real-time data and configure custom gauge layouts. This kit provides valuable monitoring for towing, daily driving, and performance diesel trucks.
Edge EAS Power Switch w/o Start Cable (98619) for Ford / Chevy / Dodge equipped with Edge Products
The Edge EAS Power Switch allows diesel truck owners to control accessories directly from their Edge CTS monitor. This plug-and-play system connects through the Edge EAS network and supports clean daisy chain installation. Each switch can control two accessories such as lights or air compressors. Compatible with Edge monitors and customizable through MyStyle software.
EAS Data Logging Kit (98618) for Edge CS2/CTS2/CTS3
The Edge EAS Data Logging Kit expands the monitoring capability of compatible Edge display systems. It includes dual EGT probes, two 0–100 PSIg pressure sensors, and two -40°F to 300°F temperature sensors. This kit allows drivers to track critical engine data during towing, racing, or performance tuning. Sensors connect directly to the Edge system and are automatically detected by the CTS3 display. With expanded monitoring and data logging capability, drivers gain the information needed to protect their engine and optimize performance.
