Tuners & Programmers
Edge Insight CTS3 (84130-3) For Most 1996+ OBDII Vehicles
$459.95The Edge Insight CTS3 digital monitor delivers real-time engine monitoring for diesel and gas trucks. The 5-inch touchscreen display shows boost, EGT, transmission temperature, and dozens of other parameters. Drivers can customize gauge layouts, log performance data, and read diagnostic trouble codes. Installation is simple through the OBDII port with no wiring required. The system also supports additional sensors through the Edge Accessory System.
EAS Replacement EGT 15 Lead Probe (98920) for Edge CS2/CTS2 and EAS EGT Kit
The Edge EAS Replacement 15 Inch EGT Lead restores proper operation for EGT monitoring systems using part number 98620. This plug-and-play replacement connects the EGT probe to the Edge Accessory System. Once installed, the sensor sends exhaust gas temperature data directly to the compatible Edge monitor. Accurate EGT monitoring helps protect diesel engines during towing or performance use. Installation requires a properly drilled and tapped exhaust manifold for the EGT probe.
REPLACEMENT EGT PROBE (98900) For Edge Juice w/Attitude Products
The Edge Juice with Attitude Replacement EGT Probe is a direct replacement sensor designed for Edge Juice with Attitude systems. It restores accurate exhaust gas temperature monitoring for Juice CS2, CTS2, and CTS3 devices. The probe installs easily with a plug and play design and includes new hardware and heat shrink. This replacement probe ensures reliable EGT readings to help protect your diesel engine during towing or performance driving.
Edge EAS Street Diesel Kit (98623) for Edge CTS3 and CS2/CTS2
The Edge EAS Street Diesel Kit expands the monitoring capability of CTS3 displays. It includes an EGT probe and two 0–100 psi pressure sensors for monitoring exhaust gas temperature, boost pressure, and fuel pressure. The EAS system connects directly to the CTS3 monitor and installs quickly with plug-and-play wiring. Once installed, drivers can view real-time data and configure custom gauge layouts. This kit provides valuable monitoring for towing, daily driving, and performance diesel trucks.
Edge EAS Power Switch w/o Start Cable (98619) for Ford / Chevy / Dodge equipped with Edge Products
The Edge EAS Power Switch allows diesel truck owners to control accessories directly from their Edge CTS monitor. This plug-and-play system connects through the Edge EAS network and supports clean daisy chain installation. Each switch can control two accessories such as lights or air compressors. Compatible with Edge monitors and customizable through MyStyle software.
EAS Data Logging Kit (98618) for Edge CS2/CTS2/CTS3
The Edge EAS Data Logging Kit expands the monitoring capability of compatible Edge display systems. It includes dual EGT probes, two 0–100 PSIg pressure sensors, and two -40°F to 300°F temperature sensors. This kit allows drivers to track critical engine data during towing, racing, or performance tuning. Sensors connect directly to the Edge system and are automatically detected by the CTS3 display. With expanded monitoring and data logging capability, drivers gain the information needed to protect their engine and optimize performance.
EAS Competition Kit (98617) For All Edge Products
The Edge EAS Competition Kit expands the monitoring capability of compatible Edge display systems. It includes sensors for exhaust gas temperature, boost pressure, and critical vehicle temperatures. This kit works well for trucks with upgraded turbos or performance modifications. The EAS system allows sensors to daisy chain together under the hood for a clean installation. It is ideal for towing, racing, dyno testing, and high-performance diesel applications.
Edge EAS Pressure Sensor – 0-100 psig (98607) For All Diesel / Gas Applications
The Edge EAS Pressure Sensor 98607 measures 0-100 PSI and connects to the Edge EAS Universal Sensor Input system for use with CTS2 and CTS3 monitors.
EAS Universal Sensor Input – 5 Volt (98605) For All Diesel / Gas Applications
The Edge EAS Universal Sensor Input 98605 allows Edge monitors to read and display signals from two 0–5 volt sensors.
EAS Starter Kit Cable (98602) For CS2/CTS2/CTS3
The Edge EAS Starter Kit Cable 98602 allows drivers to connect EAS accessories and expand monitoring capabilities on compatible Edge monitors.
Edge EAS Backup Camera – License Plate Mount (98202) For All Diesel / Gas Applications
The Edge EAS Backup Camera 98202 mounts to the license plate and integrates with the CTS2 monitor to provide a rear camera display.
Edge Replacement power cable (98108) for CTS3, Trinity 2, and TrailDash 3.
The Edge Replacement Power Cable 98108 connects the vehicle OBDII port to compatible Edge monitors including CTS2, CTS3, Trinity 2, Dashpaq Plus, and TrailDash 3.
Edge CTS3 Camera Adapter (98107) For All Diesel / Gas Applications
The Edge CTS3 Camera Adapter 98107 converts RCA camera connections to Micro USB so existing backup cameras can work with the CTS3 monitor.
Edge OBDII Splitter Cable (98106) for All Diesel / Gas Applications
The Edge OBDII Splitter Cable 98106 allows two devices to connect to the vehicle’s OBDII port at the same time. Perfect for monitors, tuners, and accessories.
Edge Pod Adapter Kit w/ Grommet (98005) For All Diesel / Gas Applications
The Edge Pod Adapter Kit 98005 allows newer Edge monitors such as CTS2 and CTS3 to fit existing dash pods without modification.
Gauge Pillar Adapter – 2-1/16 Inch (98004) For All Diesel / Gas Applications
The Edge Gauge Pillar Adapter 98004 converts a 2-1/16 gauge pillar pod to mount Edge monitors such as CTS3, CTS2, CS2, Trinity 2, and DashPaq Plus.
Edge Evolution CS2 – California Carb Approved (85301) For 1994-2019 Duramax / Powerstroke / Cummins
The Edge Evolution CS2 delivers flash tuning and engine monitoring for Ford Power Stroke, Dodge Cummins, and GM Duramax trucks. It includes preloaded tuning levels designed for mileage, towing, and performance use. The color screen display provides real-time engine data and customizable gauges. Installation is simple with a plug-and-play connection through the OBDII port. Built-in diagnostics allow drivers to read and clear trouble codes quickly.
Edge Diesel Evolution CS2 – 50 State Legal (85300) For 1994-2019 Cummins / Duramax / Powerstroke
The Edge Evolution CS2 diesel tuner provides flash tuning and engine monitoring for Ford Power Stroke, Dodge Cummins, and GM Duramax trucks. It includes preloaded tuning levels designed for mileage, towing, and performance use. The color display shows real-time engine data and customizable gauges. Installation is simple through the OBDII port with a plug-and-play setup. Built-in diagnostics allow drivers to read and clear trouble codes quickly.
Edge Insight CS2 (84030) For Most 1996+ OBDII Vehicles
The Edge Insight CS2 provides real-time vehicle monitoring through a compact digital gauge display. It connects through the OBDII port and works with many Ford, GM, and Ram vehicles. Drivers can monitor engine parameters, customize gauge layouts, and read diagnostic trouble codes. Installation is simple with a plug-and-play design. The Insight CS2 delivers reliable monitoring at an affordable price.
CTS2 Juice Attitude to CTS3 Upgrade Kit (83601-3) For 1998.5-2021 Cummins 5.9L / 6.7L & 2001-2007 Duramax 6.6L
The Edge Juice CTS3 Display Upgrade Kit upgrades older CS2 and CTS2 Juice with Attitude systems to the modern CTS3 monitor. The kit includes the CTS3 touchscreen display, window mount, and update cable. Drivers gain faster processing speeds, improved graphics, and a modern swipe interface. Installation is plug-and-play with an existing Juice system. This upgrade works with Cummins and Duramax applications but does not support Power Stroke platforms.
Edge A-Pillar Display Mount (38605) for 1998.5-2002 Cummins 5.9L
The Edge A-Pillar Display Mount 38605 mounts Edge monitors on the A-pillar of 1998.5–2002 Dodge Ram Cummins trucks.
Edge Dash Pod (38503) for 1998.5-2002 Cummins equipped with CS2 or CTS1
The Edge Dash Pod 38503 mounts Edge CS2 and CTS monitors in 1998.5–2002 Dodge Ram Cummins trucks with a factory-style dash installation.
Edge Competition Juice w/ Attitude CTS3 (31701-3) For 2001-2002 Cummins 5.9L
The Edge Competition Juice with Attitude CTS3 delivers extreme performance and real-time monitoring for diesel trucks using VP44 injection systems. The system combines an inline performance module with a 5-inch CTS3 touchscreen monitor. Drivers can adjust power levels on the fly and monitor important engine data in real time. The module supports fueling up to 3600 RPM and can deliver up to 150 horsepower gains. Built-in safety backdowns help protect the engine during heavy use.
Edge Juice with Attitude (31501-3) fits 2001-2002 DODGE (5.9L)
The Edge Juice with Attitude CTS3 31501-3 is an inline performance module and monitor for 2001-2002 Dodge Ram 2500 and 3500 trucks with the 5.9L Cummins engine. It delivers increased horsepower and torque while providing real-time engine monitoring through the CTS3 touchscreen display. The system includes plug-and-play installation, built-in safety backdowns, and an EGT probe for monitoring exhaust gas temperatures.
