All Products
BD Diesel High Idle Control – Automatic w/Cruise Control (1036605) for 2004-2006 Duramax LLY
The BD Diesel High Idle Control (1036605) is a plug-and-play upgrade for 2004–2006 GM Duramax LLY diesel engines. It allows users to raise engine idle speed using factory cruise control buttons, which is useful for cold starts, battery charging, or PTO use. The device helps maintain optimal engine performance during idle in cold conditions and installs easily without modifying the factory wiring. It’s a practical enhancement for Duramax owners seeking better idle control.
Bilstein Front B8 5160 Shock (25-312027) for 2011-2024 Duramax LML / L5P
The Bilstein B8 5160 remote reservoir shock absorbers are high-performance, direct-fit upgrades for lifted trucks and SUVs. Designed for off-road durability, they feature a remote reservoir for improved cooling and wheel travel, a monotube design for consistent performance, and vehicle-specific digressive valve tuning. They also include a 360-degree swivel banjo hose fitting and sleek billet reservoir mounts for a clean installation. These shocks enhance overall durability and optimize off-road performance.
BD Diesel Xtruded Trans Oil Cooler – 1/2 inch Cooler Lines 47RH,47RE,48RE,68RFE (1030606-1/2) for 1994-2012 Cummins 5.9L / 6.7L & 2003-2016 Powerstroke 6.0L / 6.4L / 6.7L / 7.3L
The BD Diesel Xtruded Transmission Oil Cooler (1030606-1/2) is a high-performance cooling system designed for heavy-duty use, featuring 1/2-inch lines for improved fluid flow and heat dissipation. Compatible with Dodge Ram (1994–2012) and Ford Super Duty (2003–2016) diesel trucks, it supports various Cummins and Powerstroke engines. Its Xtruded design enhances thermal efficiency and durability, making it ideal for towing and demanding driving conditions. The cooler helps extend transmission life by maintaining optimal temperatures.
BD Diesel Build-It Stage 2 Intermediate Kit 68RFE (1062022) for 2007.5-2018 Cummins 6.7L
The BD Diesel Build-It Stage 2 Intermediate Kit 68RFE (1062022) is a transmission upgrade for 2007.5–2018 Dodge Ram trucks with the 6.7L Cummins engine and 68RFE automatic transmission. Designed for increased durability and torque capacity, it includes upgraded clutches, steels, and internal parts to handle higher horsepower and towing demands. Ideal for trucks exceeding stock performance, the kit enhances reliability and strength without requiring a full transmission replacement.
AlphaRex 880535 06-08 Dodge Ram LUXX-Series LED Projector Headlights Black
The AlphaRex 880535 06-08 Dodge Ram LUXX-Series LED Projector Headlights in black are a stylish and functional upgrade for any Dodge Ram owner. These headlights feature a sleek black housing with LED projector technology, providing a brighter and more efficient lighting experience. The LUXX-Series design also adds a touch of modern elegance to the truck’s appearance. These headlights are specifically designed for the 2006-2008 Dodge Ram models, ensuring a perfect fit and easy installation. With the combination of superior lighting and a sleek design, the AlphaRex 880535 headlights are a must-have for any Dodge Ram enthusiast looking to enhance their vehicle’s look and performance.
BD Diesel SWAY BAR END LINK KIT (1032052) for 2013-2024 Cummins 6.7L
The BD Diesel Sway Bar End Link Kit (1032052) is a durable suspension upgrade for 2013–2024 Ram trucks with the 6.7L Cummins engine. Designed to replace factory end links, it enhances strength, reduces body roll, and improves stability—especially when towing or off-roading. Made with heavy-duty zinc-plated steel and polyurethane bushings, it offers increased articulation for lifted trucks and is built for long-term performance in tough conditions. Easy to install, it’s an ideal solution for upgrading your Ram’s suspension system.
BD DIESEL STAGE 1 PERFORMANCE CP3 PUMP & INJECTOR PACKAGE (1051510) for 2007.5-2018 Cummins 6.7L
The BD Diesel Stage 1 Performance CP3 Pump & Injector Package (1051510) is a performance upgrade for 2007.5–2018 Dodge Ram trucks with a 6.7L Cummins engine. It includes a remanufactured CP3 injection pump and matched high-quality fuel injectors, designed to increase fuel flow, improve combustion, and enhance throttle response and horsepower. Ideal for mild performance upgrades or towing, the kit maintains fuel economy and drivability while offering reliable and consistent power. All components meet or exceed OEM standards, making it a dependable choice for boosting performance without sacrificing reliability.
MBRP 5″ DPF-Back Exhaust Armor Plus, Tour Profile, Single Side Exit, Stainless Steel Tip (S62930409) for 2017-2020 Powerstroke 6.7L
The 5″ DPF-Back Exhaust (S62930409) from Armor Plus is a high-quality exhaust system designed for trucks. It features a tour profile and a single side exit, with a stainless steel tip for added durability. This exhaust system is specifically designed to improve the performance and sound of your truck, while also reducing back pressure and increasing fuel efficiency. Its key features include a 5″ diameter for maximum airflow, a DPF-back design for easy installation, and a sleek stainless steel finish. With its superior design and construction, the Armor Plus 5″ DPF-Back Exhaust is the perfect upgrade for any truck owner looking for improved performance and a more aggressive sound.
Bilstein Front Leveling Kit (F4-SE5-C765-H0) for 2005-2016 Powerstroke 6.0L / 6.4L / 6.7L
The Bilstein B8 5112 suspension kit is a high-performance front leveling kit designed to increase ground clearance, support larger tires, and enhance wheel travel. It includes two B8 5100 shock absorbers and two matched coil springs, and installs easily into factory locations without modifications. The kit delivers a smooth, stable ride on and off-road.
S&B Body Mount Kit (81-1000) for 2003-2007 Powerstroke 6.0L
The S&B Body Mount Kit (81-1000) is a must-have for any owner of a 2003-2007 Powerstroke 6.0L. This kit is specifically designed to provide superior support and stability to the body of the truck, reducing the risk of any damage or wear and tear over time.
AEM Classic Digital Wideband AFR Gauge (Sensor Not Included) The Original Wideband Air/Fuel Ratio Gauge (30-4110NS)
The AEM Classic Digital Wideband AFR Gauge is the original and most trusted wideband air/fuel ratio gauge on the market. It is designed to accurately measure the air/fuel ratio of any vehicle, providing real-time data to ensure optimal performance. This digital gauge is equipped with a large, easy-to-read display that shows precise readings in either lambda or AFR. However, it is important to note that this gauge does not include a sensor, so it must be purchased separately. With its advanced technology and sleek design, the AEM Classic Digital Wideband AFR Gauge is a must-have for any performance enthusiast looking to monitor and improve their vehicle’s air/fuel ratio.
Mishimoto Low-Temperature Thermostat and Housing (MMTS-F2D-03CL) fits 2003-2007 Powerstroke 6.0L
The Mishimoto Low-Temperature Thermostat and Housing (MMTS-F2D-03CL) is a high-quality aftermarket cooling system upgrade for the 2003-2007 Powerstroke 6.0L diesel engine. Designed to improve the overall performance and reliability of the engine, this thermostat and housing kit is a must-have for any truck owner looking to get the most out of their vehicle.
Bilstein Front B8 5112 Suspension Leveling Kit (46-302137) for 2014-2024 Cummins 6.7L
The Bilstein B8 5112 suspension kit is a high-performance front leveling kit designed to increase ground clearance, support larger tires, and improve wheel travel. It includes two B8 5100 shock absorbers and two matched coil springs, and installs easily into factory locations without modification. The kit delivers a smooth, stable ride on and off-road.
Bilstein Rear 4600 Heavy Duty (B6) Shock Absorber (24-238298) for 2014-2018 Duramax LML / L5P
Bilstein B6 4600 shock absorbers are direct-fit upgrades for stock-height light trucks and SUVs. They feature a monotube design and a velocity-sensitive, digressive piston that adapts to road conditions. Tuned for each specific vehicle, they provide improved ride quality, handling, and comfort over standard OE shocks.
BD Diesel Screamer Turbo HX35 (1045758) for 1998.5-2002 Cummins 5.9L
The BD Diesel Screamer Turbo HX35 (1045758) is a high-performance, drop-in replacement turbocharger for 1998.5–2002 Dodge Ram trucks with the 5.9L Cummins engine. It offers increased airflow, horsepower, and boost capability while maintaining factory fitment and drivability. Featuring larger compressor and turbine wheels, quick spool-up, and precision-balanced components, it delivers enhanced power, efficiency, and reliability—ideal for towing, racing, or daily driving without requiring major modifications.
BD Diesel Howler Stock VGT Turbo Kit (1047139) for 2003-2007 Cummins 5.9L
The BD Diesel Howler Stock VGT Turbo Kit (1047139) is a performance upgrade for 2003–2007 Dodge Ram trucks with 5.9L Cummins engines. It replaces the stock turbo with a Variable Geometry Turbo (VGT) to improve throttle response, low-end torque, and towing performance. The kit includes a VGT turbocharger, control module, wiring harness, and installation hardware. It also enables exhaust brake functionality and better boost control, offering a modern, efficient, and powerful turbo solution for older Cummins engines.
Bilstein Rear B8 5100 Shock Absorber -Lifted- (24-186636) for 1999-2013 Duramax LB7 / LLY / LMM / LML & 2003-13 Cummins 5.9L / 6.7L
The Bilstein B8 5100 shock absorbers are designed for lifted trucks and SUVs, offering a direct fit solution. They feature a monotube design and a velocity-sensitive, digressive piston for consistent, fade-free performance that adapts to changing road conditions. Each shock is specifically tuned for its application, enhancing ride quality, handling, and comfort.
BD Diesel Iron Horn Turbo Manifold Package – Wheel Size-S363SXE/80 0.91 AR (1045292) for 2007-2018 Cummins 6.7L
This performance turbo kit replaces the stock Holset turbo to improve reliability and power. It lowers exhaust gas temperatures and turbo drive pressures, protecting the head gasket and extending engine life, while also delivering a significant horsepower boost. Ideal for both street and track use, it’s the most complete bolt-on solution available.
S&B Cold Air Intake Cotton Cleanable (75-5091) for 2007-2010 Duramax LMM 6.6L
The S&B Cold Air Intake Cotton Cleanable (75-5091) is a high-quality aftermarket upgrade for 2007-2010 Duramax LMM 6.6L engines. This cold air intake is designed to improve engine performance by increasing airflow and reducing restriction.
Bilstein Rear B8 5100 Shock Absorber (24-293471) for 2019-2024 Duramax L5P
The Bilstein B8 5100 shock absorbers are direct-fit upgrades for lifted trucks and SUVs, featuring a monotube design for consistent, fade-free performance. They use a velocity-sensitive, digressive piston that adapts to changing road conditions and are specifically tuned for each vehicle application. These shocks significantly enhance ride quality, handling, and comfort.
Air Lift LoadLifter 5000 Air Spring Kit (57390)
The Air Lift LoadLifter 5000 Air Spring Kit (57390) is a must-have for any truck or SUV owner looking to upgrade their suspension system. This kit is designed to provide maximum load support and improve overall stability, making it ideal for towing and hauling heavy loads. The air springs are adjustable, allowing you to customize the level of support needed for your specific load. The installation process is straightforward and can be completed in just a few hours with basic tools. With the LoadLifter 5000 Air Spring Kit, you can enjoy a smoother, more comfortable ride while ensuring your vehicle can handle any heavy-duty task with ease.
FASS Titanium Signature Series Diesel Fuel System TSF17250F220G 250F 220GPH, (60-65 PSI), Ford Powerstroke 6.7L 2011-2016, 900-1200hp
The FASS Titanium Signature Series Diesel Fuel System TSF17250F220G is a top-of-the-line product designed for Ford Powerstroke 6.7L engines from 2011 to 2016. With a flow rate of 220 gallons per hour and a pressure range of 60-65 PSI, this system is capable of supporting high horsepower applications ranging from 900 to 1200hp. It features advanced filtration technology and a durable titanium construction, making it a reliable and long-lasting choice for diesel fuel systems. With its impressive performance capabilities, the FASS Titanium Signature Series is the perfect choice for those looking to optimize their Ford Powerstroke 6.7L engine for maximum power and efficiency.
AEM Bosch LSU 4.9 Replacement UEGO Sensor (30-2004)
The AEM Bosch LSU 4.9 Replacement UEGO Sensor (30-2004) is a high-quality sensor designed to replace the Bosch LSU 4.9 wideband UEGO sensor for AEM’s Part Number 30-4110. This sensor is essential for accurate air/fuel ratio readings and is a direct replacement for the original sensor. It features a durable design and advanced sensor technology to ensure reliable and precise measurements. With this replacement sensor, users can trust that their AEM air/fuel ratio gauge will continue to provide accurate readings for optimal engine performance.
BD Diesel Iron Horn Turbo Manifold Package – Wheel Size-S366SXE/80 1.0 AR (1045297) for 2007-2018 Cummins 6.7L
This performance turbo kit replaces the stock Holset turbo to improve reliability and power. It lowers exhaust gas temperatures and turbo drive pressures, protecting the head gasket and extending engine life, while also delivering a significant horsepower boost. Ideal for both street and track use, it’s the most complete bolt-on solution available.
