Fleece Auxiliary Heated Fuel Filter Kit (FPE-DMAX-HFFBA-1116) for 2011-2016 Duramax LML
$418.95
The Fleece Auxiliary Heated Fuel Filter Kit (FPE-DMAX-HFFBA-1116) is an upgrade for 2011–2016 GM Duramax LML diesel engines that improves fuel system reliability, especially in cold weather. It features a high-quality auxiliary fuel filter with a built-in heating element to prevent fuel gelling, while also removing contaminants and water. Designed for durability and easy plug-and-play installation, it enhances engine protection and extends fuel system life.
Description
The Fleece Auxiliary Heated Fuel Filter Kit (FPE-DMAX-HFFBA-1116) is a high-performance upgrade designed specifically for 2011-2016 GM Duramax LML diesel engines. This kit enhances fuel system reliability by incorporating a high-quality auxiliary fuel filter with an integrated heating element, which helps prevent fuel gelling in cold weather conditions. Engineered for durability and superior filtration, it protects your engine by removing contaminants and water from diesel fuel before it reaches the injectors. The plug-and-play installation ensures minimal hassle, making it a popular choice among Duramax owners looking to improve cold-weather performance and extend the life of their fuel system components.
Additional information
| Weight | 10.0 lbs |
|---|---|
| Dimensions | 10.0 × 10.0 × 8.0 in |
| Brand |
Fitment
- 2011 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
- 2012 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
- 2013 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
- 2014 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
- 2015 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
- 2016 GM Silverado/Sierra 2500/3500 6.6L LML Duramax
Features
Fuel heater specifications:
- Temperature switching points: ON: 28.4F +/-5.4F, OFF: 48.2F +/- 5.4F
- At typical fuel flow rates a temperature increase of between 4-8F will occur across the heating element
Application Notes
- For 2011-2016 6.6L Duramax only
- This filter base eliminates the factory fuel primer bulb and is intended ONLY for use with a positive pressure lift pump such as our PowerFlo lift pump or alternative frame mounted pump.
Includes
- Fuel filter base with integral fuel heater and fittings
- Donaldson 3 micron fuel filter and water separator
- Pre-formed hose and hose clamps
- Wiring harness and fuse taps
- Water-In-Fuel (WIF) sensor and adaptation harness
Only logged in customers who have purchased this product may leave a review.
Related products
-
BD Diesel 5″ Exhaust Brake w/ Air Compressor (1028150) Universal Install
$1,640.95 Select options This product has options that may be chosen on the product page -
BD Diesel Remanufactured Stock Injector (1715522) for 2011-2016 Duramax LML
$413.95 Select options This product has options that may be chosen on the product page -
5″ Inlet Tip (T5074BLK), Black Coated, Dual Wall, Angle Cut, T304 Stainless Steel
$119.99 Add to cart -
BD Diesel High Idle Kit (1036627) for 2008-2019 Duramax LMM / LML / L5P
$328.95 Add to cart -
Bilstein Front B8 5160 Shock (25-311884) for 2011-2024 Duramax LML / L5P
$275.00 Read more -
Bilstein Rear 5100 – 0-2 inch for Leveling, Torsion Keys and Stock Height Shock Absorber (24-293082) for 2007-2013 Duramax LMM / LML
$156.60 Add to cart -
BD Diesel Constant Tension Hose Clamp 3in High Torque (1405211) Universal
$24.95 Add to cart -
BD Diesel Manual Controlled Positive Air Shut-Off (1036713-M) for 2011-2016 Duramax LML
$708.95 Add to cart
Warning
Proposition 65
This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
Reviews
There are no reviews yet.