BD Diesel Electronic PressureLoc (1030368-V2) for 2007.5-2018 Cummins 6.7L
$149.95Purchase & earn 149 points!
The BD Diesel Electronic PressureLoc (1030368-V2) is a plug-and-play performance module for 2007.5–2018 Dodge Ram trucks with 6.7L Cummins engines. It maintains fuel rail pressure during high-performance or heavy-load conditions, preventing ECM de-fueling and supporting increased horsepower and torque. The device also helps avoid low-pressure diagnostic trouble codes, improving throttle response and consistent power delivery.
The BD Diesel Electronic PressureLoc (1030368-V2) is a performance-enhancing module specifically designed for 2007.5 to 2018 Dodge Ram trucks equipped with the 6.7L Cummins diesel engine. This device effectively maintains fuel rail pressure during high-performance tuning and heavy load situations, preventing ECM de-fueling that can limit engine output. By ensuring consistent fuel delivery, the PressureLoc supports increased horsepower and torque while safeguarding against low-pressure diagnostic trouble codes (DTCs). Its plug-and-play design allows for straightforward installation, making it an ideal upgrade for enthusiasts seeking improved throttle response and sustained power under demanding conditions.
| Weight | 0.75 lbs |
|---|---|
| Dimensions | 10.9 × 6.8 × 1.75 in |
Fitment
2007.5-2018 Cummins 6.7L
Features
- Progressive pressure increase gives smooth engagements with lower load on the pump at idle
- Achieve shorter shifts and increased torque capacity without creating low-speed harshness
- Improved clutch holding capacity for increased durability
- Delivers 10 psi increase at lower pressure range and 25 psi increase at higher pressure ranges
- Advance control integrated chip eliminates the occasional error code caused by resistor based devices
- Easy to install in-line plug module
Installation
INSTALL TIME
- 30 Minutes
WARRANTY
Parts
- 12-Months
Related products
4-Inch Turbo-Back Exhaust (S6216409) Side Exit, T409 Stainless Steel, Street Profile
Ford Fuel Injector Kit (8C3Z9H529ERM) for 2008-2010 Powerstroke 6.4L
Cheetah® Turbo Charger (FPE-VNT63-STREET) for 2004.5-2010 Duramax LLY, LBZ, LMM
4″ Turbo-Back Exhaust Single Side Exit (S6212SLM) Race Profile
Bilstein Front B8 5100 Lifted Shock Absorber (24-185776) for 1994-2010 Cummins 5.9L / 6.7L & 2005-2016 Powerstroke 6.0L / 6.4L / 6.7L
MBRP Exhaust Tip (T5053) T304 Stainless Angle Cut Dual Wall (4″ INLET, 5″ OUTLET, 12″ LENGTH)
4″ Turbo Back (S6200P), Single Side P
