Powerstroke
MBRP 4″ Filter Back, Dual Outlet Single Side, T409 (S6288409) for 2011-2016 Powerstroke 6.7L
Rugged and dependable our Armor Plus Series is made of T409 stainless steel. It’s designed and built to stand up to the harshest road conditions. We are so sure that our Armor Plus has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. Budget-friendly entry into stainless steel exhaust systems.
MBRP 4″ Cat Back, Single Side (Stock Cat) Exit, T409 (S6208409) for 2003-2007 Powerstroke 6.0L EC/CC
Rugged and dependable our Armor Plus Series is made of T409 stainless steel. It’s designed and built to stand up to the harshest road conditions. We are so sure that our Armor Plus has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. Budget-friendly entry into stainless steel exhaust systems.
MBRP 4″ Turbo Back, Single Side Exit, T304 (S6200304) for 1999-2003 Powerstroke 7.3L
For the serious performance enthusiast who demands the best of the best. For your vehicle, there is no better stainless steel than T304 and no better system than the MBRP Armor Pro. With the highest chro-mium and nickel content of any exhaust, this is simply the best system money can buy. The Armor Pro Series comes with mirror polished, dual wall T304 stainless steel tip(s) included.
MBRP 4″ Filter Back, Single Side Exit, Aluminum (S6287AL) for 2011-2016 Powerstroke 6.7L
Made of 100% heavy gauge aluminized steel our Armor Lite Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Armor Lite is suitable for areas with moderate environmental conditions.
MBRP 4″ Filter Back, Single Side Dual Exit, Aluminum (S6290AL) for 2017-2026 Powerstroke 6.7L
Made of 100% heavy gauge aluminized steel our Armor Lite Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Armor Lite is suitable for areas with moderate environmental conditions.
MBRP 4″ Turbo Back, Single Side (Stock Cat) Exit, Aluminum (S6216AL) for 2003-2005 Powerstroke 6.0L Excursion
Made of 100% heavy gauge aluminized steel our Armor Lite Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Armor Lite is suitable for areas with moderate environmental conditions.
MBRP 4″ Cat Back, Single Side (Stock Cat) Exit, Aluminum (S6208AL) for 2003-2007 Powerstroke 6.0L EC/CC
Made of 100% heavy gauge aluminized steel our Armor Lite Series is designed to provide the cost conscious consumer with the same high quality design and craftsmanship as our other systems, but at a value price. Armor Lite is suitable for areas with moderate environmental conditions.
MBRP 4″ Filter Back, Cool Duals, T409 (S6291409) for 2017-2026 Powerstroke 6.7L
Rugged and dependable our Armor Plus Series is made of T409 stainless steel. It’s designed and built to stand up to the harshest road conditions. We are so sure that our Armor Plus has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. Budget-friendly entry into stainless steel exhaust systems.
MBRP 4″ Turbo Back, Single Side Exit, T409 (S6204409) for 1999 -2003 Powerstroke 7.3L Excursion
Armor Plus / formerly XP Series
Rugged and dependable our Armor Plus Series is made of T409 stainless steel. It’s designed and built to stand up to the harshest road conditions. We are so sure that our Armor Plus has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. Budget-friendly entry into stainless steel exhaust systems.
KC Turbo Jetfire Turbo Non-Whistling (302550) for 2020-2025 Powerstroke 6.7L
The KC 2020+ Jetfire Turbo is a direct drop-in upgrade for 6.7 Powerstroke trucks that delivers faster spool-up, improved boost control, and stronger power across the entire RPM range. Designed for both Standard Output and High Output applications, it increases airflow while reducing back pressure and EGTs. With upgraded internal components and KC’s Jetfire turbine technology, this turbo is built for towing, daily driving, and performance use without sacrificing drivability.
KC Turbo Jetfire Turbo Whistling (302675) for 2020-2026 Powerstroke 6.7L
The KC 2020+ Jetfire Turbo is a direct drop-in upgrade for 6.7 Powerstroke trucks that delivers faster spool-up, improved boost control, and stronger power across the entire RPM range. Designed for both Standard Output and High Output applications, it increases airflow while reducing back pressure and EGTs. With upgraded internal components and KC’s Jetfire turbine technology, this turbo is built for towing, daily driving, and performance use without sacrificing drivability.
KC Turbos Remanufactured Stock Replacement High Pressure Turbo (302148) for 2011-2025 Powerstroke 6.7L
This Remanufactured OE replacement turbo is for your high side, on your stock compound set up.
**EXHAUST BRAKES: We get asked a lot about exhaust brakes and if they work with our turbos. We have found that some brands have clearance issues and might cause the brake to hinder performance, rub the turbine wheel, or cause other issues. These brakes typically use some sort of flapper to close which causes extreme exhaust back pressure to aide in braking. This can be hard on a turbo and motor and is not recommended. It will be up to the customer to verify fitment and functionality.**
No Limit Fabrication Pre-Filter 4″ & 4.5″ Inlet (PFB) for 2003-2019 Powerstroke 6.0L / 6.4L / 6.7L
The No Limit Fabrication Pre Filter is designed to extend the life of your cold air intake filter by adding an extra layer of protection. Ideal for harsh conditions, it helps block dirt and moisture while maintaining airflow. Compatible with 6.0, 6.4, and 6.7 Powerstroke intake systems.
No Limit Fabrication Pre-Filter 5″ Inlet (PFB) for 2003-2019 Powerstroke 6.0L / 6.4L / 6.7L
The No Limit Fabrication Pre Filter is designed to extend the life of your cold air intake filter by adding an extra layer of protection. Ideal for harsh conditions, it helps block dirt and moisture while maintaining airflow. Compatible with 6.0, 6.4, and 6.7 Powerstroke intake systems.
No Limit Cold Air Intake Dry – Black – 5.5″ Turbo Inlet Turbo Inlet (64CAIBD-5.5) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Dry – Black -5″ Turbo Inlet Turbo Inlet (64CAIBD-5) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Dry – Black – OEM/KC Fusion Turbo Inlet (64CAIBD) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Pro Guard 7 – Black – 5.5″ Turbo Inlet Turbo Inlet (64CAIBP-5.5) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Pro Guard 7 – Black – 5″ Turbo Inlet Turbo Inlet (64CAIBP-5) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Pro Guard 7 – Black – OEM/KC Fusion Turbo Inlet (64CAIBP) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Oiled – Black – 5.5″ Turbo Inlet Turbo Inlet (64CAIBO5) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Oiled – Black – 5″ Turbo Inlet (64CAIBO) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
No Limit Cold Air Intake Oiled – Black – OEM/KC Fusion Turbo Inlet (64CAIBO) for 2008-2010 Powerstroke 6.4L
This cold air intake is a high flow drop in upgrade for the 6.4 Powerstroke, designed to support up to a 4 inch turbo inlet. Featuring a large filter and aluminum intake, it improves airflow, throttle response, horsepower, and torque. Installs quickly and works with both stock and upgraded turbo setups.
KC Turbos Fusion Stage 1 High Pressure Turbo (302241) for 2008-2010 Powerstroke 6.4L
The KC Fusion Stage 1 Low Pressure Turbo is an entry level upgrade for 6.4 Powerstroke trucks, designed for stock injectors and towing applications. Featuring a 71mm billet compressor wheel and 4 inch inlet, it delivers improved airflow, faster response, and reliable performance. A simple drop in upgrade that outperforms most stock based options while maintaining drivability.
