Fleece Dual Pump Hardware Kit (FPE-DPK-59-0307) for 2003-2007 Cummins 5.9L
$819.00
The Fleece Dual Pump Hardware Kit (FPE-DPK-59-0307) is designed for 2003–2007 Dodge Ram trucks with 5.9L Cummins engines. It provides the necessary hardware—brackets, pulleys, and components—to install a second CP3 injection pump (sold separately), improving fuel delivery, throttle response, and engine efficiency for high-performance or heavy-duty use.
Description
The Fleece Dual Pump Hardware Kit (FPE-DPK-59-0307) is a high-quality solution designed specifically for 2003-2007 Dodge Ram trucks equipped with the 5.9L Cummins diesel engine. This kit provides the essential components needed to install a second CP3 injection pump, enhancing fuel delivery and supporting higher horsepower applications. Ideal for performance enthusiasts and heavy-duty users, the Fleece Dual Pump Kit includes precision-engineered brackets, pulleys, and hardware to ensure a seamless and reliable installation. By optimizing fuel flow, it helps maintain consistent rail pressure under load, improving throttle response and overall engine efficiency. Note that the kit includes only the hardware; a second CP3 pump must be purchased separately.
Additional information
| Weight | 10 lbs |
|---|---|
| Dimensions | 15 × 15 × 4 in |
| Brand |
Fitment
- 2003 Dodge Ram 2500/3500 5.9L 24V Cummins
- 2004 Dodge Ram 2500/3500 5.9L 24V Cummins
- 2005 Dodge Ram 2500/3500 5.9L 24V Cummins
- 2006 Dodge Ram 2500/3500 5.9L 24V Cummins
- 2007 Dodge Ram 2500/3500 5.9L 24V Cummins
Includes
Cummins Common Rail Dual CP3 Bracket
Cummins Heavy Duty Dual Pump Belt
Fan Shroud Bracket
Dual Pump Pulley – Idler
Cummins Dual Pump Idler Pulley Spacer
Cummins Dual Pump Controller
High Pressure Dual Pump Line (CP3 to CP3)
High Pressure CP3 Fitting and Non-Return Valve
(6) M8x1.25 Flange Nuts
(6) M8x1.25×50 Carriage Bolts
M10x1.5x40mm Flange Head Cap Screw
M8×1.25 Flange Head Cap Screw
M18x1.5 CP3 Nut
Features
Application Notes
- For proper clearance and fitment, modification to the factory air intake horn may be required based on your specific configuration. Aftermarket intake horns generally provide greater clearance and may not require modifications to allow for proper fitment of this kit.
- A 6.7L CP3 pump is required for use in the secondary (top) location.
- In early applications (03-04), the APPS must be relocated. No provisions are provided in the kit for APPS relocation.
- This kit will only work in conjunction with a stock 5.9L CP3. For applications that have a 6.7L CP3 in the lower location, or are using Fleece Performance part number FPE-CUMM-CP3K-5.9 in the lower pump location, you must use our 6.7L Dual Pump Hardware kit; FPE-DPK-67-0709.
Related products
-
ARP Harmonic Damper Bolt Kit (129-2503)
$27.32 Add to cart -
4″ Turbo Back (S6218409) Single Side Exit, (Aluminized 3″ downpipe), T409 Stainless Steel
$809.99 Add to cart -
5-Inch Turbo-Back Exhaust ( S62340P) Side Exit, Race Profile
$604.99 Add to cart -
MBRP Exhaust Tip (T5053) T304 Stainless Angle Cut Dual Wall (4″ INLET, 5″ OUTLET, 12″ LENGTH)
$79.99 Add to cart -
Turbo-Back Exhaust (S6240409) 4″ Single Side Exit, Street Profile
$829.99 Add to cart -
Cheetah® Turbo Charger (FPE-LML-VNT-63-FMW-N) for 2011-2016 Duramax LML
$2,781.45 Add to cart -
MBRP Exhaust Tip (T5053BLK) Black Angled Dual Walled Exhaust Tip (4″ Inlet, 5″Outlet)
$94.99 Add to cart -
4-Inch Turbo-Back Exhaust (S6212409) Side Exit, Street Profile
$824.99 Add to cart
Warning
Proposition 65
This product can expose you to chemicals including arsenic, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
